make gold link more visable
Shorten the wait at "reload" in startup wizard to 5 seconds from 60. That's more than adequate for current systems, no need to make people sit there for 1 minute. Many likely click out via the logo and miss the last screen entirely.
Add message about Gold to setup wizard and menu/link to Gold signup.
Disable bandwidth checks for PRIQ, it should fix #3537
Fix field name that cannot contain spaces, and use displayname
Fix scheduler field name
Fix field name
Strict checks for number of WANs and LANs on wizard
Fix number of WAN / LAN interfaces detection for dedicated wizard
Try to guess number of WANs
Try to guess number of WANs and LANs
Fix number of WAN and LAN connections check
Just show right type of interfaces (LAN/WAN) on traffic shapper wizards, it fixes #3535
Remove 'multi lan/single wan' and 'multi wan/single lan' traffic shaper wizards, multi lan/wan can be used to replace any of them
Fix indent and whitespaces
Replace Header() calls by lowercase
Ensure e-mail address carries over from the CA screen to the Cert screen in the OpenVPN wizard.
use email from CA creation also as the default for server cert
replaced <br>, <br/> with <br /> in ANSI encoded files. Converted these files to UTF-8
standardize on www.pfsense.org and HTTPS, point package URLs topackages.pfsense.org
These are remenants of old 1.2 remove them from the wizard
Enhance interface gateway data entry descriptions
Prevent network or broadcast address to be set on interface (console, GUI and wizard). It should fix #3196
Change OpenVPN Compression settings to cover the full range of allowed settings on OpenVPN (unset, off, on, adaptive) rather than a simple off/on switch that either doesn't set the value or enables it with adaptive (OpenVPN's default).
Add Auth Digest to OpenVPN wizard also.
Allow multiple valid time servers to be entered in the wizard, as they are allowed under System > General
Remove call-time pass by reference from traffic shaper files, it should fix #2565
fix text
not true you have to log in again since HTTP basic auth was deprecated.
add MSS clamping to setup wizard. Now that MTU and MSS are separate, the MTU description was wrong, and both need to be there.
Avoid duplicate default gw, also look for gateways with name different from WANGW that points to same IP
Avoid set 2 sources on shaper wizard. Fixes #2959
Rule created for penalty addresses on shaper wizard should not set 'any' as source. Fixes #2959
Add a line to let the user know that the wizard can be stopped by clicking the logo at the top, so people don't think they are stuck/required to do the wizard.
Track user/time a firewall rule was created and last updated, and show this information at the bottom of the page when viewing the firewall rule. Have various places in the system that create rules add a proper entry to indicate their origin.
Fix wording for VoIP address option in the shaper. Add rule going the other direction to catch connections initiated both ways.
Permit openvpn to use same port on different interfaces. It should fix #814
Don't forget the wizard...
Allow selecting the digest algorithm when creating a CA or Cert. Implements #2765
fixed spelling
more games for traffic shaper
fixed spelling mistake
added traffic shaper game rules
Change ereg() to preg_match() function
Don't skip "lan" as a possible WAN for shaper, since someone could have renamed/repurposed it. Someone may shoot themselves in the foot if they pick it accidentally, but otherwise some valid configs may be prevented accidentally.
fix typo
Unbreak a number of explode() replacements which required preg_split()
The function split() is replaced by the function explode(). Starting with PHP 5.3 this is deprecated and with version 6 gone.Replacing it surpresses all the warnings
variable is not yet available so rebrands get a blank page on the last step in the setup wizard
When making a server certificate in the wizard, make sure we specify it must be a server certificate.
Fixes #1948. Do not specify an interface for the Voip rules that intend a source ip.
Revert "Another try at prventing panic on reconfig of ppp type wans. Ticket #1696"
This reverts commit afe88d69235f84530ed6386b22cfc9c488bf94c5.
Revert "Be correct on teh variable scope"
This reverts commit 106646b4204b2850ec7f41547079cf00cc374f6f.
Be correct on teh variable scope
Another try at prventing panic on reconfig of ppp type wans. Ticket #1696
If we are coming from a PPPoE/PPTP WAN type, grab the old physical interface first to avoid assigning a ppp interface to itself. Fixes pppoe->pppoe wizard run as well as changing pppoe->dhcp. Fixes #1696
Fixes #1696. Do not store temporary information under interfaces section during wizards since this might generate a message to netgraph that triggers a panic.
Make the checks during step4 and step5 actually work.
Correctly check the values for VoIP on multi_lan traffic shaper wizard. Reported-by: http://forum.pfsense.org/index.php/topic,32833.15.html. Ticket #1728
Declare the arrays as global since that is what they are. Correct the name of asterisk in the global defniition.
Correct battlenet data to not be overriden. Reported-by: http://forum.pfsense.org/index.php/topic,39176.0.html
Correct priority number to not have clashes with PRIQ which do not allow same priority numbers for two different queues.
Ticket #749. Make the rules of the traffic shaper wizard select the wan side of the interfaces to not make the intra-lan traffic classifible in this way.
makes correct use of printf and gettext
removes variables names and replace it with '%s'
Actually increase the default queue length for the new default queue
Respect the p2p catchall setting.
Re-enable downstream queues but with the difference that the default queue now tries to use all the link when possible and the bandwidth limit is specified on a subqueue instead of the interface.
Revert "Ticket #749. Do not create the queues at LAN side for traffic_shaper_wizard_dedicated. Since we cannot control bandwidth its useless to try to handle it(ALTQ was built with this concept in mind)."
This reverts commit cd3346e205ad0f818977b7ccd0bd7259ed2f2e4e.
Revert "Ticket #749. Do not create the queues at LAN side for traffic_shaper_wizard and traffic_shaper_wizard_multi_all. Since we cannot control bandwidth its useless to try to handle it(ALTQ was built with this concept in mind."
This reverts commit 4447358371f80814ea1c5e0f00c1a7301a2396f6.
Reconfigure wan/lan when finishing wizard, or the new IPs will not be applied.
Revert this change. reload_all() already sends a reload message. Unfortunately there is still something else lurking that causes a delay when loading the wizard step
Use send_event()
Use send_message and issue the reload all operation in the background
Skip step #9 for non pfSense branded installations
Reload the wizard and then redirect to a wizard completed step. Prompt the user to donate to the project.
Misc fixes to make the openvpn wizard stop re-creating a CA previously made via the wizard if you re-ran the wizard and chose a CA instead. Fixes #1512
Ensure the protocol on the firewall rule from the OpenVPN wizard ends up lower case, or it causes some GUI irregularities. Seen http://forum.pfsense.org/index.php/topic,33865.0.html and elsewhere.
Only make gateway changes if we have been given a new gateway IP.
Setup gateway monitoring since we just altered a gateway.
Fix gateway handling in setup wizard.
Remove direction from traffic shaper generated rules now that the match action is present to correctly put packets on proper queues. Before it was not possible since this would have also open firewall ports/holes.
The doubled "$rule = array();" lines are probably a copy/paste error. Probably meant to paste the line that sets the rule type to the match action like the rest of what was added in the affected commit.
Correctly verify the input on bandwith at voip step for traffic shaper wizards. Reported-by: http://forum.pfsense.org/index.php/topic,32833.0.html
Convert the shapers to the match action so the generated rules do not impact the filtering policy implemented.
Do proper input validation on traffic shaper wizards to not allow empty fiedls.
Properly check empty fields when specifying bandwidth values.
Fix OpenVPN wizard.
Add drop-down to select OpenVPN hardware crypto (finds usable devices from "openssl engine" list) for clients and servers.
Add a checkbox for duplicate-cn on OpenVPN servers.
Fix multi_all wizard to properly verify VoIP bandwidth specified.
Fix OpenVPN NetBIOS settings not propagating from the wizard to the server instance.
Ticket #749. Do not create the queues at LAN side for traffic_shaper_wizard_dedicated. Since we cannot control bandwidth its useless to try to handle it(ALTQ was built with this concept in mind).
Ticket #749. Do not create the queues at LAN side for traffic_shaper_wizard and traffic_shaper_wizard_multi_all. Since we cannot control bandwidth its useless to try to handle it(ALTQ was built with this concept in mind.
Use the provided settings even for HFSC scheduler instead of hardcoding 32Kbit/s speed on VoIP. Also cleanup some whitespace.