Projet

Général

Profil

Télécharger (12,5 ko) Statistiques
| Branche: | Tag: | Révision:

univnautes / etc / rc.bootup @ 4af9283c

1
#!/usr/local/bin/php -f
2
<?php
3
ini_set('apc.enabled', '0');
4

    
5
/* $Id$ */
6
/*
7
	rc.bootup
8
	part of pfSense by Scott Ullrich
9
	originally based on m0n0wall (http://m0n0.ch/wall)
10
	Copyright (C) 2004-2009 Scott Ullrich <sullrich@pfsense.org>.
11
	Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
12
	Copyright (C) 2009 Erik Kristensen
13
	All rights reserved.
14

    
15
	Redistribution and use in source and binary forms, with or without
16
	modification, are permitted provided that the following conditions are met:
17

    
18
	1. Redistributions of source code must retain the above copyright notice,
19
	   this list of conditions and the following disclaimer.
20

    
21
	2. Redistributions in binary form must reproduce the above copyright
22
	   notice, this list of conditions and the following disclaimer in the
23
	   documentation and/or other materials provided with the distribution.
24

    
25
	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
26
	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
27
	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
28
	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
29
	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30
	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31
	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32
	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33
	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34
	POSSIBILITY OF SUCH DAMAGE.
35
*/
36

    
37
function rescue_detect_keypress() {
38
	// How long do you want the script to wait before moving on (in seconds)
39
	$timeout=9;
40
	echo "\n";
41
    echo "[ Press R to enter recovery mode or ]\n";
42
	echo "[  press I to launch the installer  ]\n\n";
43
	echo "(R)ecovery mode can assist by rescuing config.xml\n";
44
	echo "from a broken hard disk installation, etc.\n\n";
45
	echo "(I)nstaller may be invoked now if you do \n";
46
	echo "not wish to boot into the liveCD environment at this time.\n\n";
47
	echo "(C) continues the LiveCD bootup without further pause.\n\n";
48
	echo "Timeout before auto boot continues (seconds): {$timeout}";
49
	$key = null;
50
	exec("/bin/stty erase " . chr(8));
51
	while(!in_array($key, array("c", "C", "r","R", "i", "I", "~", "!"))) {
52
	        echo chr(8) . "{$timeout}";
53
	        `/bin/stty -icanon min 0 time 25`;
54
	        $key = trim(`KEY=\`dd count=1 2>/dev/null\`; echo \$KEY`);
55
	        `/bin/stty icanon`;
56
	        // Decrement our timeout value
57
	        $timeout--;
58
	        // If we have reached 0 exit and continue on
59
	        if ($timeout == 0) 
60
				break;
61
	}
62
	// If R or I was pressed do our logic here
63
	if (in_array($key, array("r", "R"))) {
64
	  putenv("TERM=cons25");
65
	  echo "\n\nRecovery mode selected...\n";
66
	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer_rescue");
67
	} elseif (in_array($key, array("i", "I"))) {
68
	  putenv("TERM=cons25");  
69
	  echo "\n\nInstaller mode selected...\n";
70
	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer");
71
	  if(file_exists("/tmp/install_complete")) {
72
		passthru("/etc/rc.reboot");
73
		exit;
74
	  }
75
	} elseif (in_array($key, array("!", "~"))) {
76
 		putenv("TERM=cons25");
77
		echo "\n\nRecovery shell selected...\n";
78
		echo "\n";
79
		touch("/tmp/donotbootup");
80
		exit;
81
	} else {
82
		echo "\n\n";
83
	}
84
}
85

    
86
echo " done.\n";
87

    
88
echo "Initializing...";
89
echo ".";
90
require_once("/etc/inc/globals.inc");
91
echo ".";
92
require_once("/etc/inc/led.inc");
93
led_normalize();
94
echo ".";
95
if (led_count() >= 3) {
96
	led_kitt();
97
}
98

    
99
/* let the other functions know we're booting */
100
$pkg_interface = 'console';
101
$g['booting'] = true;
102

    
103
/* parse the configuration and include all functions used below */
104
require_once("/etc/inc/config.inc");
105
echo ".";
106
require_once("/etc/inc/config.console.inc");
107
echo ".";
108
require_once("/etc/inc/auth.inc");
109
echo ".";
110
require_once("/etc/inc/functions.inc");
111
echo ".";
112
require_once("/etc/inc/filter.inc");
113
echo ".";
114
require_once("/etc/inc/shaper.inc");
115
echo ".";
116
require_once("/etc/inc/ipsec.inc");
117
echo ".";
118
require_once("/etc/inc/vpn.inc");
119
echo ".";
120
require_once("/etc/inc/openvpn.inc");
121
echo ".";
122
require_once("/etc/inc/captiveportal.inc");
123
echo ".";
124
require_once("/etc/inc/rrd.inc");
125
echo ".";
126
require_once("/etc/inc/pfsense-utils.inc");
127
echo ".";
128

    
129
/* get system memory amount */
130
$memory = get_memory();
131
$physmem = $memory[0];
132
$realmem = $memory[1];
133
echo " done.\n";
134

    
135
conf_mount_rw();
136

    
137
/* save dmesg output to file */
138
system_dmesg_save();
139

    
140
/* check whether config reset is desired (via hardware button on WRAP/ALIX) */
141
system_check_reset_button();
142

    
143
/* remove previous firmware upgrade if present */
144
if (file_exists("/root/firmware.tgz")) 
145
	unlink("/root/firmware.tgz");
146

    
147
/* start devd (dhclient now uses it) */
148
echo "Starting device manager (devd)...";
149
mute_kernel_msgs();
150
start_devd();
151
set_device_perms();
152
unmute_kernel_msgs();
153
echo "done.\n";
154

    
155
// Display rescue configuration option
156
if($g['platform'] == "cdrom") 
157
		rescue_detect_keypress();
158

    
159
echo "Loading configuration...";
160
parse_config_bootup();
161
echo "done.\n";
162

    
163
if($g['platform'] == "jail") {
164
	/* We must determine what network settings have been configured for us */
165
	$wanif = "lo0";	/* defaults, if the jail admin hasn't set us up */
166
	$ipaddr = "127.0.0.1";
167
	$iflist = get_interface_list();
168
	foreach ($iflist as $iface => $ifa) {
169
		if (isset($ifa['ipaddr'])) {
170
			$wanif = $iface;
171
			$ipaddr = $ifa['ipaddr'];
172
			break;
173
		}
174
	}
175
	$config['interfaces'] = array();
176
	$config['interfaces']['lan'] = array();
177
	$config['interfaces']['lan']['enable'] = false;
178
	$config['interfaces']['wan'] = array();
179
	/* XXX, todo */
180
	$config['interfaces']['wan']['if'] = $wanif;
181
	$config['interfaces']['wan']['ipaddr'] = $ipaddr;
182
	$config['interfaces']['wan']['subnet'] = "32";	/* XXX right? */
183
	$config['interfaces']['wan']['enable'] = true;
184
	if($config['dhcpd']['lan']) 
185
		unset($config['dhcpd']['lan']['enable']);
186
	unlink_if_exists('/conf/trigger_initial_wizard');
187
	write_config();
188
} else {
189
	/*
190
	 *  Determine if we need to throw a interface exception
191
	 *  and ask the user to reassign interfaces.  This will
192
	 *  avoid a reboot and thats a good thing.
193
	 */
194
	while(is_interface_mismatch() == true) {
195
		led_assigninterfaces();
196
		if (isset($config['revision'])) {
197
			if (file_exists("{$g['tmp_path']}/missing_interfaces"))
198
				echo "Warning: Configuration references interfaces that do not exist: " . file_get_contents("{$g['tmp_path']}/missing_interfaces") . "\n";
199
			echo "\nNetwork interface mismatch -- Running interface assignment option.\n";
200
		} else
201
			echo "\nDefault interfaces not found -- Running interface assignment option.\n";
202
		$ifaces = get_interface_list();
203
		if (is_array($ifaces)) {
204
			foreach($ifaces as $iface => $ifdata)
205
				interfaces_bring_up($iface);
206
		}
207
		set_networking_interfaces_ports();
208
		led_kitt();
209
	}
210
}
211

    
212
/* convert config and clean backups */
213
echo "Updating configuration...";
214
convert_config();
215
echo "done.\n";
216

    
217
echo "Cleaning backup cache...";
218
cleanup_backupcache(true);
219
echo "done.\n";
220

    
221
/* read in /etc/sysctl.conf and set values if needed */
222
echo "Setting up extended sysctls...";
223
system_setup_sysctl();
224
echo "done.\n";
225

    
226
/* enable optional crypto modules */
227
load_crypto();
228

    
229
/* enable optional thermal sensor modules */
230
load_thermal_hardware();
231

    
232
/* run any early shell commands specified in config.xml */
233
system_do_shell_commands(1);
234

    
235
/* set up our timezone */
236
system_timezone_configure();
237

    
238
/* set up our hostname */
239
system_hostname_configure();
240

    
241
/* make hosts file */
242
system_hosts_generate();
243

    
244
/* configure loopback interface */
245
interfaces_loopback_configure();
246

    
247
/* start syslogd */
248
system_syslogd_start();
249

    
250
echo "Starting Secure Shell Services...";
251
mwexec_bg("/etc/sshd");
252
echo "done.\n";
253

    
254
/* setup polling */
255
echo "Setting up polling defaults...";
256
setup_polling();
257
echo "done.\n";
258

    
259
/* setup interface microcode which improves tcp/ip speed */
260
echo "Setting up interfaces microcode...";
261
setup_microcode();
262
echo "done.\n";
263

    
264
/* set up interfaces */
265
if(!$debugging)
266
	mute_kernel_msgs();
267
interfaces_configure();
268
if(!$debugging)
269
	unmute_kernel_msgs();
270

    
271
/* re-make hosts file after configuring interfaces */
272
system_hosts_generate();
273

    
274
/* start OpenVPN server & clients */
275
echo "Syncing OpenVPN settings...";
276
openvpn_resync_all();
277
echo "done.\n";
278

    
279
/* generate resolv.conf */
280
system_resolvconf_generate();
281

    
282
/* setup altq + pf */
283
filter_configure_sync();
284

    
285
/* start pflog */
286
echo "Starting PFLOG...";
287
filter_pflog_start();
288
echo "done.\n";
289

    
290
/* reconfigure our gateway monitor */
291
echo "Setting up gateway monitors...";
292
setup_gateways_monitor();
293
echo "done.\n";
294

    
295
echo "Synchronizing user settings...";
296
local_sync_accounts();
297
echo "done.\n";
298

    
299
if($realmem > 0 and $realmem < 65) {
300
	echo "System has less than 65 megabytes of ram {$realmem}.  Delaying webConfigurator startup.\n";
301
	/* start webConfigurator up on final pass */
302
	mwexec("/usr/local/sbin/pfSctl -c 'service restart webgui'");
303
} else {
304
	/* start web server */
305
	system_webgui_start();
306
}
307

    
308
/* configure cron service */
309
echo "Configuring CRON...";
310
configure_cron();
311
echo "done.\n";
312

    
313
/* set up static routes */
314
system_routing_configure();
315

    
316
/* enable routing */
317
system_routing_enable();
318

    
319
/* start dnsmasq service */
320
services_dnsmasq_configure();
321

    
322
/* Do an initial time sync */
323
echo "Starting NTP time client...";
324
/* At bootup this will just write the config, ntpd will launch from ntpdate_sync_once.sh */
325
system_ntp_configure(false);
326
mwexec_bg("/usr/local/sbin/ntpdate_sync_once.sh", true);
327
echo "done.\n";
328

    
329
/* start load balancer daemon */
330
relayd_configure();
331

    
332
/* configure console menu */
333
system_console_configure();
334

    
335
/* start DHCP service */
336
services_dhcpd_configure();
337

    
338
/* start dhcpleases dhpcp hosts leases program */
339
system_dhcpleases_configure();
340

    
341
/* start DHCP relay */
342
services_dhcrelay_configure();
343

    
344
/* start DHCP6 relay */
345
services_dhcrelay6_configure();
346

    
347
/* dyndns service updates */
348
send_event("service reload dyndnsall");
349

    
350
/* Run a filter configure now that most all services have started */
351
filter_configure_sync();
352

    
353
/* setup pppoe and pptp */
354
vpn_setup();
355

    
356
/* start the captive portal */
357
captiveportal_configure();
358
$res = mwexec_bg("/usr/local/univnautes/idp/rc.sh restart");
359

    
360
/* start Voucher support */
361
voucher_configure();
362

    
363
/* run any shell commands specified in config.xml */
364
system_do_shell_commands();
365

    
366
/* start IPsec tunnels */
367
$ipsec_dynamic_hosts = vpn_ipsec_configure();
368

    
369
/* start SNMP service */
370
services_snmpd_configure();
371

    
372
/* power down hard drive if needed/set */
373
system_set_harddisk_standby();
374

    
375
/* lock down console if necessary */
376
auto_login();
377

    
378
/* load graphing functions */
379
enable_rrd_graphing();
380

    
381
/* enable watchdog if supported */
382
enable_watchdog();
383

    
384
/* if <system><afterbootupshellcmd> exists, execute the command */
385
if($config['system']['afterbootupshellcmd'] <> "") {
386
	echo "Running afterbootupshellcmd {$config['system']['afterbootupshellcmd']}\n";
387
	mwexec($config['system']['afterbootupshellcmd']);
388
}
389

    
390
if($physmem < $g['minimum_ram_warning']) {
391
	require_once("/etc/inc/notices.inc");
392
	file_notice("{$g['product_name']}MemoryRequirements", "{$g['product_name']} requires at least {$g['minimum_ram_warning_text']} of RAM.  Expect unusual performance.  This platform is not supported.", "Memory", "", 1);
393
	mwexec("/sbin/sysctl net.inet.tcp.recvspace=4096");
394
	mwexec("/sbin/sysctl net.inet.tcp.sendspace=4096");
395
}
396

    
397
/* if we are operating at 1000 then increase timeouts.
398
   this was never accounted for after moving to 1000 hz */
399
$kern_hz = `/sbin/sysctl kern.clockrate | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d"," -f1`;
400
$kern_hz = trim($kern_hz, "\r\n");
401
if($kern_hz == "1000") 
402
	mwexec("/sbin/sysctl net.inet.tcp.rexmit_min=30");
403

    
404
/* start the igmpproxy daemon */
405
services_igmpproxy_configure();
406

    
407
/* start the upnp daemon if it is enabled */
408
upnp_start();
409

    
410
/* If powerd is enabled, lets launch it */
411
activate_powerd();
412

    
413
/* Remove the old shutdown binary if we kept it. */
414
if (file_exists("/sbin/shutdown.old"))
415
	@unlink("/sbin/shutdown.old");
416

    
417
/* Resync / Reinstall packages if need be */
418
if(file_exists('/conf/needs_package_sync')) {
419
	if($config['installedpackages'] <> '' && is_array($config['installedpackages']['package'])) {
420
		require_once("pkg-utils.inc");
421
		if($g['platform'] == "pfSense" || $g['platform'] == "nanobsd") {
422
			mark_subsystem_dirty('packagelock');
423
			pkg_reinstall_all();
424
			clear_subsystem_dirty('packagelock');
425
		}
426
	}
427
	@unlink('/conf/needs_package_sync');
428
}
429

    
430
/* Give syslogd a kick after everything else has been initialized, otherwise it can occasionally
431
   fail to route syslog messages properly on both IPv4 and IPv6 */
432
system_syslogd_start();
433

    
434
/* done */
435
unset($g['booting']);
436

    
437
/* If there are ipsec dynamic hosts try again to reload the tunnels as rc.newipsecdns does */
438
if ($ipsec_dynamic_hosts) {
439
	vpn_ipsec_refresh_policies();
440
	vpn_ipsec_configure();
441
	filter_configure();
442
}
443

    
444
led_normalize();
445

    
446
conf_mount_ro();
447

    
448
?>
(39-39/110)