1
|
<?php
|
2
|
/*
|
3
|
Copyright (C) 2008 Bill Marquette, Seth Mos
|
4
|
Copyright (C) 2010 Ermal Luçi
|
5
|
All rights reserved.
|
6
|
|
7
|
Redistribution and use in source and binary forms, with or without
|
8
|
modification, are permitted provided that the following conditions are met:
|
9
|
|
10
|
1. Redistributions of source code must retain the above copyright notice,
|
11
|
this list of conditions and the following disclaimer.
|
12
|
|
13
|
2. Redistributions in binary form must reproduce the above copyright
|
14
|
notice, this list of conditions and the following disclaimer in the
|
15
|
documentation and/or other materials provided with the distribution.
|
16
|
|
17
|
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
18
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
19
|
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
20
|
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
21
|
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
22
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
23
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
24
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
25
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
26
|
POSSIBILITY OF SUCH DAMAGE.
|
27
|
|
28
|
pfSense_BUILDER_BINARIES: /sbin/route /usr/local/sbin/apinger
|
29
|
pfSense_MODULE: routing
|
30
|
|
31
|
*/
|
32
|
require_once("config.inc");
|
33
|
require_once("rrd.inc");
|
34
|
|
35
|
/* Returns an array of default values used for apinger.conf */
|
36
|
function return_apinger_defaults() {
|
37
|
return array(
|
38
|
"latencylow" => "200",
|
39
|
"latencyhigh" => "500",
|
40
|
"losslow" => "10",
|
41
|
"losshigh" => "20",
|
42
|
"interval" => "1",
|
43
|
"down" => "10",
|
44
|
"avg_delay_samples" => "10",
|
45
|
"avg_loss_samples" => "50",
|
46
|
"avg_loss_delay_samples" => "20");
|
47
|
}
|
48
|
|
49
|
/*
|
50
|
* Creates monitoring configuration file and
|
51
|
* adds appropriate static routes.
|
52
|
*/
|
53
|
function setup_gateways_monitor() {
|
54
|
global $config, $g;
|
55
|
|
56
|
$gateways_arr = return_gateways_array();
|
57
|
if (!is_array($gateways_arr)) {
|
58
|
log_error("No gateways to monitor. Apinger will not be run.");
|
59
|
killbypid("{$g['varrun_path']}/apinger.pid");
|
60
|
@unlink("{$g['varrun_path']}/apinger.status");
|
61
|
return;
|
62
|
}
|
63
|
|
64
|
$apinger_debug = "";
|
65
|
if (isset($config['system']['apinger_debug']))
|
66
|
$apinger_debug = "debug on";
|
67
|
|
68
|
$apinger_default = return_apinger_defaults();
|
69
|
$apingerconfig = <<<EOD
|
70
|
|
71
|
# pfSense apinger configuration file. Automatically Generated!
|
72
|
|
73
|
{$apinger_debug}
|
74
|
|
75
|
## User and group the pinger should run as
|
76
|
user "root"
|
77
|
group "wheel"
|
78
|
|
79
|
## Mailer to use (default: "/usr/lib/sendmail -t")
|
80
|
#mailer "/var/qmail/bin/qmail-inject"
|
81
|
|
82
|
## Location of the pid-file (default: "/var/run/apinger.pid")
|
83
|
pid_file "{$g['varrun_path']}/apinger.pid"
|
84
|
|
85
|
## Format of timestamp (%s macro) (default: "%b %d %H:%M:%S")
|
86
|
#timestamp_format "%Y%m%d%H%M%S"
|
87
|
|
88
|
status {
|
89
|
## File where the status information should be written to
|
90
|
file "{$g['varrun_path']}/apinger.status"
|
91
|
## Interval between file updates
|
92
|
## when 0 or not set, file is written only when SIGUSR1 is received
|
93
|
interval 5s
|
94
|
}
|
95
|
|
96
|
########################################
|
97
|
# RRDTool status gathering configuration
|
98
|
# Interval between RRD updates
|
99
|
rrd interval 60s;
|
100
|
|
101
|
## These parameters can be overridden in a specific alarm configuration
|
102
|
alarm default {
|
103
|
command on "/usr/local/sbin/pfSctl -c 'service reload dyndns %T' -c 'service reload ipsecdns' -c 'service reload openvpn %T' -c 'filter reload' "
|
104
|
command off "/usr/local/sbin/pfSctl -c 'service reload dyndns %T' -c 'service reload ipsecdns' -c 'service reload openvpn %T' -c 'filter reload' "
|
105
|
combine 10s
|
106
|
}
|
107
|
|
108
|
## "Down" alarm definition.
|
109
|
## This alarm will be fired when target doesn't respond for 30 seconds.
|
110
|
alarm down "down" {
|
111
|
time {$apinger_default['down']}s
|
112
|
}
|
113
|
|
114
|
## "Delay" alarm definition.
|
115
|
## This alarm will be fired when responses are delayed more than 200ms
|
116
|
## it will be canceled, when the delay drops below 100ms
|
117
|
alarm delay "delay" {
|
118
|
delay_low {$apinger_default['latencylow']}ms
|
119
|
delay_high {$apinger_default['latencyhigh']}ms
|
120
|
}
|
121
|
|
122
|
## "Loss" alarm definition.
|
123
|
## This alarm will be fired when packet loss goes over 20%
|
124
|
## it will be canceled, when the loss drops below 10%
|
125
|
alarm loss "loss" {
|
126
|
percent_low {$apinger_default['losslow']}
|
127
|
percent_high {$apinger_default['losshigh']}
|
128
|
}
|
129
|
|
130
|
target default {
|
131
|
## How often the probe should be sent
|
132
|
interval {$apinger_default['interval']}s
|
133
|
|
134
|
## How many replies should be used to compute average delay
|
135
|
## for controlling "delay" alarms
|
136
|
avg_delay_samples {$apinger_default['avg_delay_samples']}
|
137
|
|
138
|
## How many probes should be used to compute average loss
|
139
|
avg_loss_samples {$apinger_default['avg_loss_samples']}
|
140
|
|
141
|
## The delay (in samples) after which loss is computed
|
142
|
## without this delays larger than interval would be treated as loss
|
143
|
avg_loss_delay_samples {$apinger_default['avg_loss_delay_samples']}
|
144
|
|
145
|
## Names of the alarms that may be generated for the target
|
146
|
alarms "down","delay","loss"
|
147
|
|
148
|
## Location of the RRD
|
149
|
#rrd file "{$g['vardb_path']}/rrd/apinger-%t.rrd"
|
150
|
}
|
151
|
|
152
|
EOD;
|
153
|
|
154
|
$monitor_ips = array();
|
155
|
foreach($gateways_arr as $name => $gateway) {
|
156
|
/* Do not monitor if such was requested */
|
157
|
if (isset($gateway['monitor_disable']))
|
158
|
continue;
|
159
|
if (empty($gateway['monitor']) || !is_ipaddr($gateway['monitor'])) {
|
160
|
if (is_ipaddr($gateway['gateway']))
|
161
|
$gateway['monitor'] = $gateway['gateway'];
|
162
|
else /* No chance to get an ip to monitor skip target. */
|
163
|
continue;
|
164
|
}
|
165
|
|
166
|
/* if the monitor address is already used before, skip */
|
167
|
if(in_array($gateway['monitor'], $monitor_ips))
|
168
|
continue;
|
169
|
|
170
|
/* Interface ip is needed since apinger will bind a socket to it.
|
171
|
* However the config GUI should already have checked this and when
|
172
|
* PPoE is used the IP address is set to "dynamic". So using is_ipaddrv4
|
173
|
* or is_ipaddrv6 to identify packet type would be wrong, especially as
|
174
|
* further checks (that can cope with the "dynamic" case) are present inside
|
175
|
* the if block. So using $gateway['ipprotocol'] is the better option.
|
176
|
*/
|
177
|
if ($gateway['ipprotocol'] == "inet") { // This is an IPv4 gateway...
|
178
|
$gwifip = find_interface_ip($gateway['interface'], true);
|
179
|
if (!is_ipaddrv4($gwifip))
|
180
|
continue; //Skip this target
|
181
|
|
182
|
/*
|
183
|
* If the gateway is the same as the monitor we do not add a
|
184
|
* route as this will break the routing table.
|
185
|
* Add static routes for each gateway with their monitor IP
|
186
|
* not strictly necessary but is a added level of protection.
|
187
|
*/
|
188
|
if (is_ipaddrv4($gateway['gateway']) && $gateway['monitor'] != $gateway['gateway']) {
|
189
|
log_error("Removing static route for monitor {$gateway['monitor']} and adding a new route through {$gateway['gateway']}");
|
190
|
mwexec("/sbin/route change -host " . escapeshellarg($gateway['monitor']) .
|
191
|
" " . escapeshellarg($gateway['gateway']), true);
|
192
|
}
|
193
|
} else if ($gateway['ipprotocol'] == "inet6") { // This is an IPv6 gateway...
|
194
|
if ($gateway['monitor'] == $gateway['gateway']) {
|
195
|
/* link locals really need a different src ip */
|
196
|
if (is_linklocal($gateway['gateway'])) {
|
197
|
$gwifip = find_interface_ipv6_ll($gateway['interface'], true);
|
198
|
} else {
|
199
|
$gwifip = find_interface_ipv6($gateway['interface'], true);
|
200
|
}
|
201
|
} else {
|
202
|
/* 'monitor' has been set, so makes sure it has precedence over
|
203
|
* 'gateway' in defining the source IP. Otherwise if 'gateway'
|
204
|
* is a local link and 'monitor' is global routable then the
|
205
|
* ICMP6 response would not find its way back home...
|
206
|
*/
|
207
|
$gwifip = find_interface_ipv6($gateway['interface'], true);
|
208
|
if (is_linklocal($gateway['monitor'])) {
|
209
|
if (!strstr($gateway['monitor'], '%')) {
|
210
|
$gateway['monitor'] .= "%{$gateway['interface']}";
|
211
|
}
|
212
|
} else {
|
213
|
// Monitor is a routable address, so use a routable address for the "src" part
|
214
|
$gwifip = find_interface_ipv6($gateway['interface'], true);
|
215
|
}
|
216
|
}
|
217
|
|
218
|
if (!is_ipaddrv6($gwifip))
|
219
|
continue; //Skip this target
|
220
|
|
221
|
/*
|
222
|
* If the gateway is the same as the monitor we do not add a
|
223
|
* route as this will break the routing table.
|
224
|
* Add static routes for each gateway with their monitor IP
|
225
|
* not strictly necessary but is a added level of protection.
|
226
|
*/
|
227
|
if (is_ipaddrv6($gateway['gateway']) && $gateway['monitor'] != $gateway['gateway']) {
|
228
|
log_error("Removing static route for monitor {$gateway['monitor']} and adding a new route through {$gateway['gateway']}");
|
229
|
mwexec("/sbin/route change -host -inet6 " . escapeshellarg($gateway['monitor']) .
|
230
|
" " . escapeshellarg($gateway['gateway']), true);
|
231
|
}
|
232
|
} else
|
233
|
continue;
|
234
|
|
235
|
$monitor_ips[] = $gateway['monitor'];
|
236
|
$apingercfg = "target \"{$gateway['monitor']}\" {\n";
|
237
|
$apingercfg .= " description \"{$name}\"\n";
|
238
|
$apingercfg .= " srcip \"{$gwifip}\"\n";
|
239
|
|
240
|
## How often the probe should be sent
|
241
|
if (!empty($gateway['interval']) && is_numeric($gateway['interval'])) {
|
242
|
$interval = intval($gateway['interval']); # Restrict to Integer
|
243
|
if ($interval < 1) $interval = 1; # Minimum
|
244
|
if ($interval != $apinger_default['interval']) # If not default value
|
245
|
$apingercfg .= " interval " . $interval . "s\n";
|
246
|
}
|
247
|
|
248
|
## How many replies should be used to compute average delay
|
249
|
## for controlling "delay" alarms
|
250
|
if (!empty($gateway['avg_delay_samples']) && is_numeric($gateway['avg_delay_samples'])) {
|
251
|
$avg_delay_samples = intval($gateway['avg_delay_samples']); # Restrict to Integer
|
252
|
if ($avg_delay_samples < 1) $avg_delay_samples = 1; # Minimum
|
253
|
if ($avg_delay_samples != $apinger_default['avg_delay_samples']) # If not default value
|
254
|
$apingercfg .= " avg_delay_samples " . $avg_delay_samples . "\n";
|
255
|
}
|
256
|
|
257
|
## How many probes should be used to compute average loss
|
258
|
if (!empty($gateway['avg_loss_samples']) && is_numeric($gateway['avg_loss_samples'])) {
|
259
|
$avg_loss_samples = intval($gateway['avg_loss_samples']); # Restrict to Integer
|
260
|
if ($avg_loss_samples < 1) $avg_loss_samples = 1; # Minimum
|
261
|
if ($avg_loss_samples != $apinger_default['avg_loss_samples']) # If not default value
|
262
|
$apingercfg .= " avg_loss_samples " . $avg_loss_samples . "\n";
|
263
|
}
|
264
|
|
265
|
## The delay (in samples) after which loss is computed
|
266
|
## without this delays larger than interval would be treated as loss
|
267
|
if (!empty($gateway['avg_loss_delay_samples']) && is_numeric($gateway['avg_loss_delay_samples'])) {
|
268
|
$avg_loss_delay_samples = intval($gateway['avg_loss_delay_samples']); # Restrict to Integer
|
269
|
if ($avg_loss_delay_samples < 1) $avg_loss_delay_samples = 1; # Minimum
|
270
|
if ($avg_loss_delay_samples != $apinger_default['avg_loss_delay_samples']) # If not default value
|
271
|
$apingercfg .= " avg_loss_delay_samples " . $avg_loss_delay_samples . "\n";
|
272
|
}
|
273
|
|
274
|
$alarms = "";
|
275
|
$alarmscfg = "";
|
276
|
$override = false;
|
277
|
if (!empty($gateway['losslow'])) {
|
278
|
$alarmscfg .= "alarm loss \"{$name}loss\" {\n";
|
279
|
$alarmscfg .= "\tpercent_low {$gateway['losslow']}\n";
|
280
|
$alarmscfg .= "\tpercent_high {$gateway['losshigh']}\n";
|
281
|
$alarmscfg .= "}\n";
|
282
|
$alarms .= "\"{$name}loss\"";
|
283
|
$override = true;
|
284
|
} else {
|
285
|
if ($override == true)
|
286
|
$alarms .= ",";
|
287
|
$alarms .= "\"loss\"";
|
288
|
$override = true;
|
289
|
}
|
290
|
if (!empty($gateway['latencylow'])) {
|
291
|
$alarmscfg .= "alarm delay \"{$name}delay\" {\n";
|
292
|
$alarmscfg .= "\tdelay_low {$gateway['latencylow']}ms\n";
|
293
|
$alarmscfg .= "\tdelay_high {$gateway['latencyhigh']}ms\n";
|
294
|
$alarmscfg .= "}\n";
|
295
|
if ($override == true)
|
296
|
$alarms .= ",";
|
297
|
$alarms .= "\"{$name}delay\"";
|
298
|
$override = true;
|
299
|
} else {
|
300
|
if ($override == true)
|
301
|
$alarms .= ",";
|
302
|
$alarms .= "\"delay\"";
|
303
|
$override = true;
|
304
|
}
|
305
|
if (!empty($gateway['down'])) {
|
306
|
$alarmscfg .= "alarm down \"{$name}down\" {\n";
|
307
|
$alarmscfg .= "\ttime {$gateway['down']}s\n";
|
308
|
$alarmscfg .= "}\n";
|
309
|
if ($override == true)
|
310
|
$alarms .= ",";
|
311
|
$alarms .= "\"{$name}down\"";
|
312
|
$override = true;
|
313
|
} else {
|
314
|
if ($override == true)
|
315
|
$alarms .= ",";
|
316
|
$alarms .= "\"down\"";
|
317
|
$override = true;
|
318
|
}
|
319
|
if ($override == true)
|
320
|
$apingercfg .= "\talarms override {$alarms};\n";
|
321
|
|
322
|
if (isset($gateway['force_down']))
|
323
|
$apingercfg .= "\tforce_down on\n";
|
324
|
|
325
|
$apingercfg .= " rrd file \"{$g['vardb_path']}/rrd/{$gateway['name']}-quality.rrd\"\n";
|
326
|
$apingercfg .= "}\n";
|
327
|
$apingercfg .= "\n";
|
328
|
|
329
|
$apingerconfig .= $alarmscfg;
|
330
|
$apingerconfig .= $apingercfg;
|
331
|
|
332
|
# Create gateway quality RRD with settings more suitable for pfSense graph set,
|
333
|
# since apinger uses default step (300; 5 minutes) and other settings that don't
|
334
|
# match the pfSense gateway quality graph set.
|
335
|
create_gateway_quality_rrd("{$g['vardb_path']}/rrd/{$gateway['name']}-quality.rrd");
|
336
|
}
|
337
|
@file_put_contents("{$g['varetc_path']}/apinger.conf", $apingerconfig);
|
338
|
unset($apingerconfig);
|
339
|
|
340
|
if (is_dir("{$g['tmp_path']}"))
|
341
|
chmod("{$g['tmp_path']}", 01777);
|
342
|
if (!is_dir("{$g['vardb_path']}/rrd"))
|
343
|
mkdir("{$g['vardb_path']}/rrd", 0775);
|
344
|
|
345
|
@chown("{$g['vardb_path']}/rrd", "nobody");
|
346
|
|
347
|
/* Restart apinger process */
|
348
|
if (isvalidpid("{$g['varrun_path']}/apinger.pid"))
|
349
|
sigkillbypid("{$g['varrun_path']}/apinger.pid", "HUP");
|
350
|
else {
|
351
|
/* start a new apinger process */
|
352
|
@unlink("{$g['varrun_path']}/apinger.status");
|
353
|
sleep(1);
|
354
|
mwexec_bg("/usr/local/sbin/apinger -c {$g['varetc_path']}/apinger.conf");
|
355
|
sleep(1);
|
356
|
sigkillbypid("{$g['varrun_path']}/apinger.pid", "USR1");
|
357
|
}
|
358
|
|
359
|
return 0;
|
360
|
}
|
361
|
|
362
|
/* return the status of the apinger targets as a array */
|
363
|
function return_gateways_status($byname = false) {
|
364
|
global $config, $g;
|
365
|
|
366
|
$apingerstatus = array();
|
367
|
/* Always get the latest status from apinger */
|
368
|
if (file_exists("{$g['varrun_path']}/apinger.pid"))
|
369
|
sigkillbypid("{$g['varrun_path']}/apinger.pid", "USR1");
|
370
|
if (file_exists("{$g['varrun_path']}/apinger.status")) {
|
371
|
$apingerstatus = file("{$g['varrun_path']}/apinger.status");
|
372
|
} else
|
373
|
$apingerstatus = array();
|
374
|
|
375
|
$status = array();
|
376
|
foreach($apingerstatus as $line) {
|
377
|
$info = explode("|", $line);
|
378
|
if ($byname == false)
|
379
|
$target = $info[0];
|
380
|
else
|
381
|
$target = $info[2];
|
382
|
|
383
|
$status[$target] = array();
|
384
|
$status[$target]['monitorip'] = $info[0];
|
385
|
$status[$target]['srcip'] = $info[1];
|
386
|
$status[$target]['name'] = $info[2];
|
387
|
$status[$target]['lastcheck'] = $info[5] ? date('r', $info[5]) : date('r');
|
388
|
$status[$target]['delay'] = empty($info[6]) ? "0ms" : round($info[6], 1) ."ms" ;
|
389
|
$status[$target]['loss'] = empty($info[7]) ? "0.0%" : round($info[7], 1) . "%";
|
390
|
$status[$target]['status'] = trim($info[8]);
|
391
|
}
|
392
|
|
393
|
/* tack on any gateways that have monitoring disabled
|
394
|
* or are down, which could cause gateway groups to fail */
|
395
|
$gateways_arr = return_gateways_array();
|
396
|
foreach($gateways_arr as $gwitem) {
|
397
|
if(!isset($gwitem['monitor_disable']))
|
398
|
continue;
|
399
|
if(!is_ipaddr($gwitem['monitorip'])) {
|
400
|
$realif = $gwitem['interface'];
|
401
|
$tgtip = get_interface_gateway($realif);
|
402
|
if (!is_ipaddr($tgtip))
|
403
|
$tgtip = "none";
|
404
|
$srcip = find_interface_ip($realif);
|
405
|
} else {
|
406
|
$tgtip = $gwitem['monitorip'];
|
407
|
$srcip = find_interface_ip($realif);
|
408
|
}
|
409
|
if($byname == true)
|
410
|
$target = $gwitem['name'];
|
411
|
else
|
412
|
$target = $tgtip;
|
413
|
|
414
|
/* failsafe for down interfaces */
|
415
|
if($target == "none") {
|
416
|
$target = $gwitem['name'];
|
417
|
$status[$target]['name'] = $gwitem['name'];
|
418
|
$status[$target]['lastcheck'] = date('r');
|
419
|
$status[$target]['delay'] = "0.0ms";
|
420
|
$status[$target]['loss'] = "100.0%";
|
421
|
$status[$target]['status'] = "down";
|
422
|
} else {
|
423
|
$status[$target]['monitorip'] = $tgtip;
|
424
|
$status[$target]['srcip'] = $srcip;
|
425
|
$status[$target]['name'] = $gwitem['name'];
|
426
|
$status[$target]['lastcheck'] = date('r');
|
427
|
$status[$target]['delay'] = "0.0ms";
|
428
|
$status[$target]['loss'] = "0.0%";
|
429
|
$status[$target]['status'] = "none";
|
430
|
}
|
431
|
}
|
432
|
return($status);
|
433
|
}
|
434
|
|
435
|
/* Return all configured gateways on the system */
|
436
|
function return_gateways_array($disabled = false, $localhost = false, $inactive = false) {
|
437
|
global $config, $g;
|
438
|
|
439
|
$gateways_arr = array();
|
440
|
|
441
|
$found_defaultv4 = 0;
|
442
|
$found_defaultv6 = 0;
|
443
|
|
444
|
// Ensure the interface cache is up to date first
|
445
|
$interfaces = get_interface_arr(true);
|
446
|
$interfaces_v4 = array();
|
447
|
$interfaces_v6 = array();
|
448
|
|
449
|
$i = -1;
|
450
|
/* Process/add all the configured gateways. */
|
451
|
if (is_array($config['gateways']['gateway_item'])) {
|
452
|
foreach ($config['gateways']['gateway_item'] as $gateway) {
|
453
|
/* Increment it here to do not skip items */
|
454
|
$i++;
|
455
|
|
456
|
if (empty($config['interfaces'][$gateway['interface']])) {
|
457
|
if ($inactive === false)
|
458
|
continue;
|
459
|
else
|
460
|
$gateway['inactive'] = true;
|
461
|
}
|
462
|
$wancfg = $config['interfaces'][$gateway['interface']];
|
463
|
|
464
|
/* skip disabled interfaces */
|
465
|
if ($disabled === false && (!isset($wancfg['enable']) || isset($gateway['disabled'])))
|
466
|
continue;
|
467
|
|
468
|
/* if the gateway is dynamic and we can find the IPv4, Great! */
|
469
|
if (empty($gateway['gateway']) || $gateway['gateway'] == "dynamic") {
|
470
|
if ($gateway['ipprotocol'] == "inet") {
|
471
|
/* we know which interfaces is dynamic, this should be made a function */
|
472
|
$gateway['gateway'] = get_interface_gateway($gateway['interface']);
|
473
|
/* no IP address found, set to dynamic */
|
474
|
if (!is_ipaddrv4($gateway['gateway']))
|
475
|
$gateway['gateway'] = "dynamic";
|
476
|
$gateway['dynamic'] = true;
|
477
|
}
|
478
|
|
479
|
/* if the gateway is dynamic and we can find the IPv6, Great! */
|
480
|
else if ($gateway['ipprotocol'] == "inet6") {
|
481
|
/* we know which interfaces is dynamic, this should be made a function, and for v6 too */
|
482
|
$gateway['gateway'] = get_interface_gateway_v6($gateway['interface']);
|
483
|
/* no IPv6 address found, set to dynamic */
|
484
|
if (!is_ipaddrv6($gateway['gateway']))
|
485
|
$gateway['gateway'] = "dynamic";
|
486
|
$gateway['dynamic'] = true;
|
487
|
}
|
488
|
} else {
|
489
|
/* getting this detection right is hard at this point because we still don't
|
490
|
* store the address family in the gateway item */
|
491
|
if (is_ipaddrv4($gateway['gateway']))
|
492
|
$gateway['ipprotocol'] = "inet";
|
493
|
else if(is_ipaddrv6($gateway['gateway']))
|
494
|
$gateway['ipprotocol'] = "inet6";
|
495
|
}
|
496
|
|
497
|
if (isset($gateway['monitor_disable']))
|
498
|
$gateway['monitor_disable'] = true;
|
499
|
else if (empty($gateway['monitor']))
|
500
|
$gateway['monitor'] = $gateway['gateway'];
|
501
|
|
502
|
$gateway['friendlyiface'] = $gateway['interface'];
|
503
|
|
504
|
/* special treatment for tunnel interfaces */
|
505
|
if ($gateway['ipprotocol'] == "inet6") {
|
506
|
$gateway['interface'] = get_real_interface($gateway['interface'], "inet6", false, false);
|
507
|
$interfaces_v6[$gateway['friendlyiface']] = $gateway['friendlyiface'];
|
508
|
} else {
|
509
|
$gateway['interface'] = get_real_interface($gateway['interface'], "all", false, false);
|
510
|
$interfaces_v4[$gateway['friendlyiface']] = $gateway['friendlyiface'];
|
511
|
}
|
512
|
|
513
|
/* entry has a default flag, use it */
|
514
|
if (isset($gateway['defaultgw'])) {
|
515
|
if ($gateway['ipprotocol'] == "inet") {
|
516
|
$gateway['defaultgw'] = true;
|
517
|
$found_defaultv4 = 1;
|
518
|
} else if ($gateway['ipprotocol'] == "inet6") {
|
519
|
$gateway['defaultgw'] = true;
|
520
|
$found_defaultv6 = 1;
|
521
|
}
|
522
|
}
|
523
|
/* include the gateway index as the attribute */
|
524
|
$gateway['attribute'] = $i;
|
525
|
|
526
|
$gateways_arr[$gateway['name']] = $gateway;
|
527
|
}
|
528
|
}
|
529
|
unset($gateway);
|
530
|
|
531
|
/* Loop through all interfaces with a gateway and add it to a array */
|
532
|
if ($disabled == false)
|
533
|
$iflist = get_configured_interface_with_descr();
|
534
|
else
|
535
|
$iflist = get_configured_interface_with_descr(false, true);
|
536
|
|
537
|
/* Process/add dynamic v4 gateways. */
|
538
|
foreach($iflist as $ifname => $friendly ) {
|
539
|
if(! interface_has_gateway($ifname))
|
540
|
continue;
|
541
|
|
542
|
if (empty($config['interfaces'][$ifname]))
|
543
|
continue;
|
544
|
|
545
|
$ifcfg = &$config['interfaces'][$ifname];
|
546
|
if(!isset($ifcfg['enable']))
|
547
|
continue;
|
548
|
|
549
|
if(!empty($ifcfg['ipaddr']) && is_ipaddrv4($ifcfg['ipaddr']))
|
550
|
continue;
|
551
|
|
552
|
if (isset($interfaces_v4[$ifname]))
|
553
|
continue;
|
554
|
|
555
|
$ctype = "";
|
556
|
switch($ifcfg['ipaddr']) {
|
557
|
case "dhcp":
|
558
|
case "pppoe":
|
559
|
case "pptp":
|
560
|
case "ppp":
|
561
|
$ctype = strtoupper($ifcfg['ipaddr']);
|
562
|
break;
|
563
|
default:
|
564
|
if (substr($ifcfg['if'], 0, 4) == "ovpn") {
|
565
|
// if current iface is an ovpn server endpoint then skip it
|
566
|
if (substr($ifcfg['if'], 4, 1) == 's')
|
567
|
continue 2;
|
568
|
|
569
|
$ctype = "VPNv4";
|
570
|
}
|
571
|
break;
|
572
|
}
|
573
|
$ctype = "_". strtoupper($ctype);
|
574
|
|
575
|
$gateway = array();
|
576
|
$gateway['dynamic'] = false;
|
577
|
$gateway['ipprotocol'] = "inet";
|
578
|
$gateway['gateway'] = get_interface_gateway($ifname, $gateway['dynamic']);
|
579
|
$gateway['interface'] = get_real_interface($ifname);
|
580
|
$gateway['friendlyiface'] = $ifname;
|
581
|
$gateway['name'] = "{$friendly}{$ctype}";
|
582
|
$gateway['attribute'] = "system";
|
583
|
|
584
|
if (($gateway['dynamic'] === "default") && ($found_defaultv4 == 0)) {
|
585
|
$gateway['defaultgw'] = true;
|
586
|
$gateway['dynamic'] = true;
|
587
|
$found_defaultv4 = 1;
|
588
|
}
|
589
|
/* Loopback dummy for dynamic interfaces without a IP */
|
590
|
if (!is_ipaddrv4($gateway['gateway']) && $gateway['dynamic'] == true)
|
591
|
$gateway['gateway'] = "dynamic";
|
592
|
|
593
|
/* automatically skip known static and dynamic gateways we have a array entry for */
|
594
|
foreach($gateways_arr as $gateway_item) {
|
595
|
if ((($ifname == $gateway_item['friendlyiface'] && $friendly == $gateway_item['name'])&& ($gateway['ipprotocol'] == $gateway_item['ipprotocol'])) ||
|
596
|
($ifname == $gateway_item['friendlyiface'] && $gateway_item['dynamic'] == true) && ($gateway['ipprotocol'] == $gateway_item['ipprotocol']))
|
597
|
continue 2;
|
598
|
}
|
599
|
|
600
|
if (is_ipaddrv4($gateway['gateway']))
|
601
|
$gateway['monitor'] = $gateway['gateway'];
|
602
|
|
603
|
$gateway['descr'] = "Interface {$friendly}{$ctype} Gateway";
|
604
|
$gateways_arr[$gateway['name']] = $gateway;
|
605
|
}
|
606
|
unset($gateway);
|
607
|
|
608
|
/* Process/add dynamic v6 gateways. */
|
609
|
foreach($iflist as $ifname => $friendly ) {
|
610
|
/* If the user has disabled IPv6, they probably don't want any IPv6 gateways. */
|
611
|
if (!isset($config['system']['ipv6allow']))
|
612
|
break;
|
613
|
|
614
|
if(! interface_has_gatewayv6($ifname))
|
615
|
continue;
|
616
|
|
617
|
if (empty($config['interfaces'][$ifname]))
|
618
|
continue;
|
619
|
|
620
|
$ifcfg = &$config['interfaces'][$ifname];
|
621
|
if(!isset($ifcfg['enable']))
|
622
|
continue;
|
623
|
|
624
|
if(!empty($ifcfg['ipaddrv6']) && is_ipaddrv6($ifcfg['ipaddrv6']))
|
625
|
continue;
|
626
|
|
627
|
if(isset($interfaces_v6[$ifname]))
|
628
|
continue;
|
629
|
|
630
|
$ctype = "";
|
631
|
switch($ifcfg['ipaddrv6']) {
|
632
|
case "slaac":
|
633
|
case "dhcp6":
|
634
|
case "6to4":
|
635
|
case "6rd":
|
636
|
$ctype = strtoupper($ifcfg['ipaddrv6']);
|
637
|
break;
|
638
|
default:
|
639
|
$tunnelif = substr($ifcfg['if'], 0, 3);
|
640
|
if (substr($ifcfg['if'], 0, 4) == "ovpn") {
|
641
|
// if current iface is an ovpn server endpoint then skip it
|
642
|
if (substr($ifcfg['if'], 4, 1) == 's')
|
643
|
continue 2;
|
644
|
|
645
|
$ctype = "VPNv6";
|
646
|
} else if ($tunnelif == "gif" || $tunnelif == "gre")
|
647
|
$ctype = "TUNNELv6";
|
648
|
break;
|
649
|
}
|
650
|
$ctype = "_". strtoupper($ctype);
|
651
|
|
652
|
$gateway = array();
|
653
|
$gateway['dynamic'] = false;
|
654
|
$gateway['ipprotocol'] = "inet6";
|
655
|
$gateway['gateway'] = get_interface_gateway_v6($ifname, $gateway['dynamic']);
|
656
|
$gateway['interface'] = get_real_interface($ifname, "inet6");
|
657
|
switch($ifcfg['ipaddrv6']) {
|
658
|
case "6rd":
|
659
|
case "6to4":
|
660
|
$gateway['dynamic'] = "default";
|
661
|
break;
|
662
|
}
|
663
|
$gateway['friendlyiface'] = $ifname;
|
664
|
$gateway['name'] = "{$friendly}{$ctype}";
|
665
|
$gateway['attribute'] = "system";
|
666
|
|
667
|
if (($gateway['dynamic'] === "default") && ($found_defaultv6 == 0)) {
|
668
|
$gateway['defaultgw'] = true;
|
669
|
$gateway['dynamic'] = true;
|
670
|
$found_defaultv6 = 1;
|
671
|
}
|
672
|
|
673
|
/* Loopback dummy for dynamic interfaces without a IP */
|
674
|
if (!is_ipaddrv6($gateway['gateway']) && $gateway['dynamic'] == true)
|
675
|
$gateway['gateway'] = "dynamic";
|
676
|
|
677
|
/* automatically skip known static and dynamic gateways we have a array entry for */
|
678
|
foreach($gateways_arr as $gateway_item) {
|
679
|
if ((($ifname == $gateway_item['friendlyiface'] && $friendly == $gateway_item['name']) && ($gateway['ipprotocol'] == $gateway_item['ipprotocol'])) ||
|
680
|
($ifname == $gateway_item['friendlyiface'] && $gateway_item['dynamic'] == true) && ($gateway['ipprotocol'] == $gateway_item['ipprotocol']))
|
681
|
continue 2;
|
682
|
}
|
683
|
|
684
|
if (is_ipaddrv6($gateway['gateway']))
|
685
|
$gateway['monitor'] = $gateway['gateway'];
|
686
|
|
687
|
$gateway['descr'] = "Interface {$friendly}{$ctype} Gateway";
|
688
|
$gateways_arr[$gateway['name']] = $gateway;
|
689
|
}
|
690
|
unset($gateway);
|
691
|
|
692
|
/* FIXME: Should this be enabled.
|
693
|
* Some interface like wan might be default but have no info recorded
|
694
|
* the config. */
|
695
|
/* this is a fallback if all else fails and we want to get packets out @smos */
|
696
|
if ($found_defaultv4 == 0 || $found_defaultv6 == 0) {
|
697
|
foreach ($gateways_arr as &$gateway) {
|
698
|
if (($gateway['friendlyiface'] == "wan") && ($found_defaultv4 == 0) && (!isset($gateway['ipprotocol']) || ($gateway['ipprotocol'] == "inet"))) {
|
699
|
if (file_exists("{$g['tmp_path']}/{$gateway['interface']}_defaultgw")) {
|
700
|
$gateway['defaultgw'] = true;
|
701
|
$found_defaultv4 = 1;
|
702
|
}
|
703
|
}
|
704
|
if (($gateway['friendlyiface'] == "wan") && ($found_defaultv6 == 0) && ($gateway['ipprotocol'] == "inet6")) {
|
705
|
if (file_exists("{$g['tmp_path']}/{$gateway['interface']}_defaultgwv6")) {
|
706
|
$gateway['defaultgw'] = true;
|
707
|
$found_defaultv6 = 1;
|
708
|
}
|
709
|
}
|
710
|
}
|
711
|
}
|
712
|
|
713
|
if($localhost === true) {
|
714
|
/* attach localhost for Null routes */
|
715
|
$gwlo4 = array();
|
716
|
$gwlo4['name'] = "Null4";
|
717
|
$gwlo4['interface'] = "lo0";
|
718
|
$gwlo4['ipprotocol'] = "inet";
|
719
|
$gwlo4['gateway'] = "127.0.0.1";
|
720
|
$gwlo6 = array();
|
721
|
$gwlo6['name'] = "Null6";
|
722
|
$gwlo6['interface'] = "lo0";
|
723
|
$gwlo6['ipprotocol'] = "inet6";
|
724
|
$gwlo6['gateway'] = "::1";
|
725
|
$gateways_arr['Null4'] = $gwlo4;
|
726
|
$gateways_arr['Null6'] = $gwlo6;
|
727
|
}
|
728
|
return($gateways_arr);
|
729
|
}
|
730
|
|
731
|
function fixup_default_gateway($ipprotocol, $gateways_status, $gateways_arr) {
|
732
|
global $config, $g;
|
733
|
/*
|
734
|
* NOTE: The code below is meant to replace the default gateway when it goes down.
|
735
|
* This facilitates services running on pfSense itself and are not handled by a PBR to continue working.
|
736
|
*/
|
737
|
$upgw = "";
|
738
|
$dfltgwdown = false;
|
739
|
$dfltgwfound = false;
|
740
|
foreach ($gateways_arr as $gwname => $gwsttng) {
|
741
|
if (($gwsttng['ipprotocol'] == $ipprotocol) && isset($gwsttng['defaultgw'])) {
|
742
|
$dfltgwfound = true;
|
743
|
$dfltgwname = $gwname;
|
744
|
if (!isset($gwsttng['monitor_disable']) && stristr($gateways_status[$gwname]['status'], "down"))
|
745
|
$dfltgwdown = true;
|
746
|
}
|
747
|
/* Keep a record of the last up gateway */
|
748
|
/* XXX: Blacklist lan for now since it might cause issues to those who have a gateway set for it */
|
749
|
if (empty($upgw) && ($gwsttng['ipprotocol'] == $ipprotocol) && (isset($gwsttng['monitor_disable']) || !stristr($gateways_status[$gwname]['status'], "down")) && $gwsttng[$gwname]['friendlyiface'] != "lan")
|
750
|
$upgw = $gwname;
|
751
|
if ($dfltgwdown == true && !empty($upgw))
|
752
|
break;
|
753
|
}
|
754
|
if ($dfltgwfound == false) {
|
755
|
$gwname = convert_friendly_interface_to_friendly_descr("wan");
|
756
|
if (!empty($gateways_status[$gwname]) && stristr($gateways_status[$gwname]['status'], "down"))
|
757
|
$dfltgwdown = true;
|
758
|
}
|
759
|
if ($dfltgwdown == true && !empty($upgw)) {
|
760
|
if ($gateways_arr[$upgw]['gateway'] == "dynamic")
|
761
|
$gateways_arr[$upgw]['gateway'] = get_interface_gateway($gateways_arr[$upgw]['friendlyiface']);
|
762
|
if (is_ipaddr($gateways_arr[$upgw]['gateway'])) {
|
763
|
log_error("Default gateway down setting {$upgw} as default!");
|
764
|
if(is_ipaddrv6($gateways_arr[$upgw]['gateway'])) {
|
765
|
$inetfamily = "-inet6";
|
766
|
} else {
|
767
|
$inetfamily = "-inet";
|
768
|
}
|
769
|
mwexec("/sbin/route change {$inetfamily} default {$gateways_arr[$upgw]['gateway']}");
|
770
|
}
|
771
|
} else {
|
772
|
$defaultgw = trim(exec("/sbin/route -n get -{$ipprotocol} default | /usr/bin/awk '/gateway:/ {print $2}'"), " \n");
|
773
|
if(is_ipaddrv6($gateways_arr[$dfltgwname]['gateway'])) {
|
774
|
$inetfamily = "-inet6";
|
775
|
} else {
|
776
|
$inetfamily = "-inet";
|
777
|
}
|
778
|
if ($defaultgw != $gateways_arr[$dfltgwname]['gateway'])
|
779
|
mwexec("/sbin/route change {$inetfamily} default {$gateways_arr[$dfltgwname]['gateway']}");
|
780
|
}
|
781
|
}
|
782
|
|
783
|
/*
|
784
|
* Return an array with all gateway groups with name as key
|
785
|
* All gateway groups will be processed before returning the array.
|
786
|
*/
|
787
|
function return_gateway_groups_array() {
|
788
|
global $config, $g;
|
789
|
|
790
|
/* fetch the current gateways status */
|
791
|
$gateways_status = return_gateways_status(true);
|
792
|
$gateways_arr = return_gateways_array();
|
793
|
$gateway_groups_array = array();
|
794
|
|
795
|
if (isset($config['system']['gw_switch_default'])) {
|
796
|
fixup_default_gateway("inet", $gateways_status, $gateways_arr);
|
797
|
fixup_default_gateway("inet6", $gateways_status, $gateways_arr);
|
798
|
}
|
799
|
if (is_array($config['gateways']['gateway_group'])) {
|
800
|
$carplist = get_configured_carp_interface_list();
|
801
|
foreach ($config['gateways']['gateway_group'] as $group) {
|
802
|
/* create array with group gateways members separated by tier */
|
803
|
$tiers = array();
|
804
|
$backupplan = array();
|
805
|
$gwvip_arr = array();
|
806
|
foreach ($group['item'] as $item) {
|
807
|
list($gwname, $tier, $vipname) = explode("|", $item);
|
808
|
|
809
|
if (is_ipaddr($carplist[$vipname])) {
|
810
|
if (!is_array($gwvip_arr[$group['name']]))
|
811
|
$gwvip_arr[$group['name']] = array();
|
812
|
$gwvip_arr[$group['name']][$gwname] = $vipname;
|
813
|
}
|
814
|
|
815
|
/* Do it here rather than reiterating again the group in case no member is up. */
|
816
|
if (!is_array($backupplan[$tier]))
|
817
|
$backupplan[$tier] = array();
|
818
|
$backupplan[$tier][] = $gwname;
|
819
|
|
820
|
/* check if the gateway is available before adding it to the array */
|
821
|
if (is_array($gateways_status[$gwname])) {
|
822
|
$status = $gateways_status[$gwname];
|
823
|
$gwdown = false;
|
824
|
if (stristr($status['status'], "down")) {
|
825
|
$msg = sprintf(gettext("MONITOR: %s is down, removing from routing group {$group['name']}"), $gwname);
|
826
|
$gwdown = true;
|
827
|
} else if (stristr($status['status'], "loss") && strstr($group['trigger'], "loss")) {
|
828
|
/* packet loss */
|
829
|
$msg = sprintf(gettext("MONITOR: %s has packet loss, removing from routing group {$group['name']}"), $gwname);
|
830
|
$gwdown = true;
|
831
|
} else if (stristr($status['status'], "delay") && strstr($group['trigger'] , "latency")) {
|
832
|
/* high latency */
|
833
|
$msg = sprintf(gettext("MONITOR: %s has high latency, removing from routing group {$group['name']}"), $gwname);
|
834
|
$gwdown = true;
|
835
|
}
|
836
|
if ($gwdown == true) {
|
837
|
log_error($msg);
|
838
|
notify_via_growl($msg);
|
839
|
notify_via_smtp($msg);
|
840
|
} else {
|
841
|
/* Online add member */
|
842
|
if (!is_array($tiers[$tier]))
|
843
|
$tiers[$tier] = array();
|
844
|
$tiers[$tier][] = $gwname;
|
845
|
}
|
846
|
} else if (isset($gateways_arr[$gwname]['monitor_disable']))
|
847
|
$tiers[$tier][] = $gwname;
|
848
|
}
|
849
|
$tiers_count = count($tiers);
|
850
|
if ($tiers_count == 0) {
|
851
|
/* Oh dear, we have no members! Engage Plan B */
|
852
|
if (!$g['booting']) {
|
853
|
$msg = gettext("Gateways status could not be determined, considering all as up/active. (Group: {$group['name']})");
|
854
|
log_error($msg);
|
855
|
notify_via_growl($msg);
|
856
|
//notify_via_smtp($msg);
|
857
|
}
|
858
|
$tiers = $backupplan;
|
859
|
}
|
860
|
/* sort the tiers array by the tier key */
|
861
|
ksort($tiers);
|
862
|
|
863
|
/* we do not really foreach the tiers as we stop after the first tier */
|
864
|
foreach ($tiers as $tieridx => $tier) {
|
865
|
/* process all gateways in this tier */
|
866
|
foreach ($tier as $member) {
|
867
|
/* determine interface gateway */
|
868
|
if (isset($gateways_arr[$member])) {
|
869
|
$gateway = $gateways_arr[$member];
|
870
|
$int = $gateway['interface'];
|
871
|
$gatewayip = "";
|
872
|
if(is_ipaddr($gateway['gateway']))
|
873
|
$gatewayip = $gateway['gateway'];
|
874
|
else if (!empty($int))
|
875
|
$gatewayip = get_interface_gateway($gateway['friendlyiface']);
|
876
|
|
877
|
if (!empty($int)) {
|
878
|
$gateway_groups_array[$group['name']]['ipprotocol'] = $gateway['ipprotocol'];
|
879
|
if (is_ipaddr($gatewayip)) {
|
880
|
$groupmember = array();
|
881
|
$groupmember['int'] = $int;
|
882
|
$groupmember['gwip'] = $gatewayip;
|
883
|
$groupmember['weight'] = isset($gateway['weight']) ? $gateway['weight'] : 1;
|
884
|
if (is_array($gwvip_arr[$group['name']])&& !empty($gwvip_arr[$group['name']][$member]))
|
885
|
$groupmember['vip'] = $gwvip_arr[$group['name']][$member];
|
886
|
$gateway_groups_array[$group['name']][] = $groupmember;
|
887
|
}
|
888
|
}
|
889
|
}
|
890
|
}
|
891
|
/* we should have the 1st available tier now, exit stage left */
|
892
|
if (count($gateway_groups_array[$group['name']]) > 0)
|
893
|
break;
|
894
|
else
|
895
|
log_error("GATEWAYS: Group {$group['name']} did not have any gateways up on tier {$tieridx}!");
|
896
|
}
|
897
|
}
|
898
|
}
|
899
|
|
900
|
return ($gateway_groups_array);
|
901
|
}
|
902
|
|
903
|
/* Update DHCP WAN Interface ip address in gateway group item */
|
904
|
function dhclient_update_gateway_groups_defaultroute($interface = "wan") {
|
905
|
global $config, $g;
|
906
|
foreach($config['gateways']['gateway_item'] as & $gw) {
|
907
|
if($gw['interface'] == $interface) {
|
908
|
$current_gw = get_interface_gateway($interface);
|
909
|
if($gw['gateway'] <> $current_gw) {
|
910
|
$gw['gateway'] = $current_gw;
|
911
|
$changed = true;
|
912
|
}
|
913
|
}
|
914
|
}
|
915
|
if($changed && $current_gw)
|
916
|
write_config(sprintf(gettext('Updating gateway group gateway for %1$s - new gateway is %2$s'), $interfac, $current_gw));
|
917
|
}
|
918
|
|
919
|
function lookup_gateway_ip_by_name($name) {
|
920
|
|
921
|
$gateways_arr = return_gateways_array(false, true);
|
922
|
foreach ($gateways_arr as $gname => $gw) {
|
923
|
if ($gw['name'] === $name || $gname === $name)
|
924
|
return $gw['gateway'];
|
925
|
}
|
926
|
|
927
|
return false;
|
928
|
}
|
929
|
|
930
|
function lookup_gateway_monitor_ip_by_name($name) {
|
931
|
|
932
|
$gateways_arr = return_gateways_array(false, true);
|
933
|
if (!empty($gateways_arr[$name])) {
|
934
|
$gateway = $gateways_arr[$name];
|
935
|
if(!is_ipaddr($gateway['monitor']))
|
936
|
return $gateway['gateway'];
|
937
|
|
938
|
return $gateway['monitor'];
|
939
|
}
|
940
|
|
941
|
return (false);
|
942
|
}
|
943
|
|
944
|
function lookup_gateway_interface_by_name($name) {
|
945
|
|
946
|
$gateways_arr = return_gateways_array(false, true);
|
947
|
if (!empty($gateways_arr[$name])) {
|
948
|
$interfacegw = $gateways_arr[$name]['friendlyiface'];
|
949
|
return ($interfacegw);
|
950
|
}
|
951
|
|
952
|
return (false);
|
953
|
}
|
954
|
|
955
|
function get_interface_gateway($interface, &$dynamic = false) {
|
956
|
global $config, $g;
|
957
|
|
958
|
$gw = NULL;
|
959
|
|
960
|
$gwcfg = $config['interfaces'][$interface];
|
961
|
if (!empty($gwcfg['gateway']) && is_array($config['gateways']['gateway_item'])) {
|
962
|
foreach($config['gateways']['gateway_item'] as $gateway) {
|
963
|
if(($gateway['name'] == $gwcfg['gateway']) && (is_ipaddrv4($gateway['gateway']))) {
|
964
|
$gw = $gateway['gateway'];
|
965
|
break;
|
966
|
}
|
967
|
}
|
968
|
}
|
969
|
|
970
|
// for dynamic interfaces we handle them through the $interface_router file.
|
971
|
if (!is_ipaddrv4($gw) && !is_ipaddrv4($gwcfg['ipaddr'])) {
|
972
|
$realif = get_real_interface($interface);
|
973
|
if (file_exists("{$g['tmp_path']}/{$realif}_router")) {
|
974
|
$gw = trim(file_get_contents("{$g['tmp_path']}/{$realif}_router"), " \n");
|
975
|
$dynamic = true;
|
976
|
}
|
977
|
if (file_exists("{$g['tmp_path']}/{$realif}_defaultgw"))
|
978
|
$dynamic = "default";
|
979
|
|
980
|
}
|
981
|
|
982
|
/* return gateway */
|
983
|
return ($gw);
|
984
|
}
|
985
|
|
986
|
function get_interface_gateway_v6($interface, &$dynamic = false) {
|
987
|
global $config, $g;
|
988
|
|
989
|
$gw = NULL;
|
990
|
$gwcfg = $config['interfaces'][$interface];
|
991
|
if (!empty($gwcfg['gatewayv6']) && is_array($config['gateways']['gateway_item'])) {
|
992
|
foreach($config['gateways']['gateway_item'] as $gateway) {
|
993
|
if(($gateway['name'] == $gwcfg['gatewayv6']) && (is_ipaddrv6($gateway['gateway']))) {
|
994
|
$gw = $gateway['gateway'];
|
995
|
break;
|
996
|
}
|
997
|
}
|
998
|
}
|
999
|
|
1000
|
// for dynamic interfaces we handle them through the $interface_router file.
|
1001
|
if (!is_ipaddrv6($gw) && !is_ipaddrv6($gwcfg['ipaddrv6'])) {
|
1002
|
$realif = get_real_interface($interface);
|
1003
|
if (file_exists("{$g['tmp_path']}/{$realif}_routerv6")) {
|
1004
|
$gw = trim(file_get_contents("{$g['tmp_path']}/{$realif}_routerv6"), " \n");
|
1005
|
$dynamic = true;
|
1006
|
}
|
1007
|
if (file_exists("{$g['tmp_path']}/{$realif}_defaultgwv6"))
|
1008
|
$dynamic = "default";
|
1009
|
|
1010
|
}
|
1011
|
/* return gateway */
|
1012
|
return ($gw);
|
1013
|
}
|
1014
|
|
1015
|
/* Check a IP address against a gateway IP or name
|
1016
|
* to verify it's address family */
|
1017
|
function validate_address_family($ipaddr, $gwname) {
|
1018
|
$v4ip = false;
|
1019
|
$v6ip = false;
|
1020
|
$v4gw = false;
|
1021
|
$v6gw = false;
|
1022
|
|
1023
|
if(is_ipaddrv4($ipaddr))
|
1024
|
$v4ip = true;
|
1025
|
if(is_ipaddrv6($ipaddr))
|
1026
|
$v6ip = true;
|
1027
|
if(is_ipaddrv4($gwname))
|
1028
|
$v4gw = true;
|
1029
|
if(is_ipaddrv6($gwname))
|
1030
|
$v6gw = true;
|
1031
|
|
1032
|
if($v4ip && $v4gw)
|
1033
|
return true;
|
1034
|
if($v6ip && $v6gw)
|
1035
|
return true;
|
1036
|
|
1037
|
/* still no match, carry on, lookup gateways */
|
1038
|
if(is_ipaddrv4(lookup_gateway_ip_by_name($gwname)))
|
1039
|
$v4gw = true;
|
1040
|
if(is_ipaddrv6(lookup_gateway_ip_by_name($gwname)))
|
1041
|
$v6gw = true;
|
1042
|
|
1043
|
$gw_array = return_gateways_array();
|
1044
|
if(is_array($gw_array[$gwname])) {
|
1045
|
switch($gw_array[$gwname]['ipprotocol']) {
|
1046
|
case "inet":
|
1047
|
$v4gw = true;
|
1048
|
break;
|
1049
|
case "inet6":
|
1050
|
$v6gw = true;
|
1051
|
break;
|
1052
|
}
|
1053
|
}
|
1054
|
|
1055
|
if($v4ip && $v4gw)
|
1056
|
return true;
|
1057
|
if($v6ip && $v6gw)
|
1058
|
return true;
|
1059
|
|
1060
|
return false;
|
1061
|
}
|
1062
|
|
1063
|
/* check if a interface is part of a gateway group */
|
1064
|
function interface_gateway_group_member($interface) {
|
1065
|
global $config;
|
1066
|
|
1067
|
if (is_array($config['gateways']['gateway_group']))
|
1068
|
$groups = $config['gateways']['gateway_group'];
|
1069
|
else
|
1070
|
return false;
|
1071
|
|
1072
|
$gateways_arr = return_gateways_array(false, true);
|
1073
|
foreach($groups as $group) {
|
1074
|
if(is_array($group['item'])) {
|
1075
|
foreach($group['item'] as $item) {
|
1076
|
$elements = explode("|", $item);
|
1077
|
$gwname = $elements[0];
|
1078
|
if ($interface == $gateways_arr[$gwname]['interface']) {
|
1079
|
unset($gateways_arr);
|
1080
|
return true;
|
1081
|
}
|
1082
|
}
|
1083
|
}
|
1084
|
}
|
1085
|
unset($gateways_arr);
|
1086
|
|
1087
|
return false;
|
1088
|
}
|
1089
|
|
1090
|
function gateway_is_gwgroup_member($name) {
|
1091
|
global $config;
|
1092
|
|
1093
|
if (is_array($config['gateways']['gateway_group']))
|
1094
|
$groups = $config['gateways']['gateway_group'];
|
1095
|
else
|
1096
|
return false;
|
1097
|
|
1098
|
$members = array();
|
1099
|
foreach($groups as $group) {
|
1100
|
if (is_array($group['item'])) {
|
1101
|
foreach($group['item'] as $item) {
|
1102
|
$elements = explode("|", $item);
|
1103
|
$gwname = $elements[0];
|
1104
|
if ($name == $elements[0])
|
1105
|
$members[] = $group['name'];
|
1106
|
}
|
1107
|
}
|
1108
|
}
|
1109
|
|
1110
|
return $members;
|
1111
|
}
|
1112
|
?>
|